Project Gallery
Archive for April 2012
-
LCD Shield for Axe401
Submitted by: billygreen1973This is a 'shield' for the Axe401 Shieldbase. It uses the same firmware chip as the Axe033 serial/I2C LCD, and hence the same commands. It does however have ...
View Project -
Picaxe 28 pin PCB
Submitted by: tarzanThis PCB was made for the Picaxe 28X microcontroller, but will work with any 28 pin Picaxe microcontroller. It has 3.5mm stereo socket wired differently from...
View Project -
14M2 Voltmeter Clock w/ F°, C°, and K°
Submitted by: ironjungleThe objective was to create a real time clock using three analog voltmeters controlled via Pulse Width Modulation (PWM) to display "hours", "minutes", and "s...
View Project
Past Competition WinnersView all winners
-
World-of-P-Play
Submitted by: HohnhorstIntroduction ========= This is the blueprint for a fantastic game adventure which bases on a BOT120 PICAXE-20X2 MICROBOT. What is World-of-P-Play? ==...
View Project -
Walter the Robot
Submitted by: chris_the_carpenterWalter has been a work in progress for quite a while now. Powered by (2) 40x2's on a custom board with tons of hand-made items. Enclosed are just a couple vi...
View Project -
Sound sensor activated led eyes
Submitted by: jarimA pair of leds will flash momentarily whenever someone makes a loud noise. The led intensity depends on the sound level. The leds fade out smoothly. A sim...
View Project