-
... I built a small robot for a contest over at www.trossenrobotics.com based on the 18x and motor driver board.
It was a pretty fun project and the PicAxe made things pretty...
-
... I've created this robot for surveyance, it can provide wireless video, dc to ac convertion, alarm an can recharge its batteries with asolar panel, its brain is a 18m2...
-
... I thought I'd post a picture and a video for you see my first attempt at a robot.
It's a pretty simple 2 motor set-up driven by an L239D motor driver on a 28X1 project board...
-
... This is work in progress, but have got to the point where the robot moves, now need to add the sensors, battery holders and fix the board down.
This robot is all about the looks...
-
... I had a "Drifting RC car", and wanted to see if I could turn it into a robot really easily. Using an AXE230 an SRF05, and a couple of old servos for hardware, I managed...
-
... This is a robot I built to track things. I built this robot to help spice up my science fair project.
I built this using a picaxe 28x1, a DAGU pan/tilt bracet, an IR sensor...
-
... Hi guys, this is my first robot rover!!!
TAMIYA - Twin motor gearbox
TAMIYA - Truck tire set 36mm + Ball Cater da 3.8mm
POLOLU - Round robot chassis
PICAXE18x
L293D...
-
... Picaxe Autonomous Robot / Big Track
2 Processors on board ( Picaxe 08M IR detection + Picaxe 20X2 main processor).
2 dc motors/Weel and motors gears encoder circuit...
-
... Even in its "natural" state the OWI Edge Robot Arm is a pretty interesting toy. It comes... US.
The greatest thing about the OWI Edge Robot Arm is that you assembly it yourself so...
-
... Quite simple, I have made a robot lawn mower from a 20X2 picaxe.
The driver motors are viper motors from a Mazda and the cutter motor is a radiator blower motor also from...