Project Gallery

Archive for January 2013

What's your PICAXE project about?

We would love to hear about your PICAXE project. All projects are entered into our monthly competition and could win a great PICAXE prize.

To enter this month's competition submit your project now

  • "EL Skorpiano" Autonomous Robot

    Submitted by: _Gareth_
    "EL Skorpiano" Autonomous Robot

    This is a project based on Picaxe 08M2 chips. It is an Autonomous Robot using Stepper motors and Infra Red Leds as sensors. It has both Left and right Brai...

    View Project
  • Humidity Chamber

    Submitted by: nickcinquino
    Humidity Chamber

    PICAXE 08M2 Controlled Humidity Chamber - Nick Cinquino 1/12/13 A humidity-controlled chamber has several practical uses, such as the storage of tobac...

    View Project

Past Competition WinnersView all winners

  • Q a four wheeled trainer

    Submitted by: jinx
    Q a four wheeled trainer

    Q designed using sketchup and printed on my prusa i2 Q uses the 28x2 shield for motor control and a 14m2 for servo control shield been modded to use the ERF...

    View Project
  • DHT11 and DHT22 from 32MHz PICAXE

    Submitted by: pleitch
    DHT11 and DHT22 from 32MHz PICAXE

    The DHT range of sensors are very cheap sensors that provides both temperature and humidity in a digital form. This means that actual numbers are provided f...

    View Project
  • My (simpler) Shield

    Submitted by: cactusface
    My (simpler) Shield

    My version of the Shield! Using a 20M2 or X2, this is a little more basic! but easier for beginners to understand, it does'nt have the port pins scattered t...

    View Project