What's your PICAXE project about?
We would love to hear about your PICAXE project. All projects are entered into our monthly competition and could win a great PICAXE prize.
To enter this month's competition submit your project now
This is a 'shield' for the Axe401 Shieldbase. It uses the same firmware chip as the Axe033 serial/I2C LCD, and hence the same commands. It does however have ...
This PCB was made for the Picaxe 28X microcontroller, but will work with any 28 pin Picaxe microcontroller. It has 3.5mm stereo socket wired differently from...
The objective was to create a real time clock using three analog voltmeters controlled via Pulse Width Modulation (PWM) to display "hours", "minutes", and "s...
This is a project based on Picaxe 08M2 chips. It is an Autonomous Robot using Stepper motors and Infra Red Leds as sensors. It has both Left and right Brai...
The DHT range of sensors are very cheap sensors that provides both temperature and humidity in a digital form. This means that actual numbers are provided f...
This is work in progress, but have got to the point where the robot moves, now need to add the sensors, battery holders and fix the board down. This robot is...