Project Gallery

Archive for December 2012

What's your PICAXE project about?

We would love to hear about your PICAXE project. All projects are entered into our monthly competition and could win a great PICAXE prize.

To enter this month's competition submit your project now

  • Analog Clock turned DC Voltmeter

    Submitted by: ironjungle
    Analog Clock turned DC Voltmeter

    The concept is easy. Use the "time" on an analog clock to display measured voltage values between 0-12VDC. 1 o'clock means 1VDC, 2 o'clock means 2VDC; if t...

    View Project
  • CPR simulator and trainer

    Submitted by: nznrg
    CPR simulator and trainer

    The Fenton cardiopulmonary resuscitation simulator uses a PICAXE 08M to measure and monitor heart compression rate. The instrument operates in two modes; sta...

    View Project

Past Competition WinnersView all winners

  • SnapAXE - using PICAXE with Snap Circuits and Brainbox

    Submitted by: ncoplin
    SnapAXE - using PICAXE with Snap Circuits and Brainbox

    This project was created to add microprocessor support to the myriad of "SNAP" based systems used for teaching electronics. These snap circuit systems provid...

    View Project
  • Mr. Magoo, the Robot

    Submitted by: Dave Harpe
    Mr. Magoo, the Robot

    My first Picaxe robot, and first use of a Picaxe chip. A very long time ago, I used to make things like this with a Motorola 6800, this is way different, and...

    View Project
  • LCD Shield for Axe401

    Submitted by: billygreen1973
    LCD Shield for Axe401

    This is a 'shield' for the Axe401 Shieldbase. It uses the same firmware chip as the Axe033 serial/I2C LCD, and hence the same commands. It does however have ...

    View Project